HL7 FHIR Implementation Guide: Public Health IG Release 1 - BE Realm | STU1
1.0.3 - STU1 Belgium flag

This page is part of the HL7 FHIR Implementation Guide: Public Health IG Release 1 - BE Realm | STU1 (v1.0.3: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Logical Model: BeModelPopulationScreening - Detailed Descriptions

Active as of 2024-06-12

Definitions for the BeModelPopulationScreening logical model.

Guidance on how to interpret the contents of this table can be found here

0. BeModelPopulationScreening
Definition

Logical model for recurrent population based screening. The model represents one iteration of a screening, called episode. A patient can have multiple episodes for a given screening. A screening of a specific type for a given patient can be repeated after a certain period. Each time the screening is repeated results in a new episode.

ShortLogical model for population screening event
Logical ModelInstances of this logical model are not marked to be the target of a Reference
2. BeModelPopulationScreening.patient
Definition

The patient for the screening

ShortThe patient for the screening
Control1..1
TypeReference(Patient)
4. BeModelPopulationScreening.screeningType
Definition

The related screening, for example breast cancer, colon cancer or cervicalcancer.

ShortThe related screening
Control1..1
TypeCodeableConcept
6. BeModelPopulationScreening.screeningYear
Definition

The year of the screening process/episode for the given screening. If the patient participated, the participation year is taken. If the patient didn't participate, the calendar year of the invitation is taken. If there is no invitation or participation, there will be no episode. For example, if patient is allowed a population based screening every 2 years for a given screening type and the first screening episode invitation took place in 2022, the next episode will be created for the next invitation in 2024. If the patient has a refusal or exclusion registered and does not have a participation/invitation, so the patient does not have any episodes, the calendar year of the registration of the refusal/exclusion is taken.

ShortThe calendar year of the screening
Control1..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
8. BeModelPopulationScreening.invitation
Definition

An invitation is not mandatory, in some cases a patient can participate for a screening without an invitation.

ShortThe appointment details of the invitation
Control0..1
TypeBackboneElement
10. BeModelPopulationScreening.invitation.date
Definition

The date the patient is invited to participate in the population based screening

ShortThe date the patient is invited to participate in the population based screening
Control1..1
Typedate
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
12. BeModelPopulationScreening.invitation.time
Definition

The time for the screening if there is a proposed appointment. This is the case for breast cancer screening.

ShortThe time for the screening if there is a proposed appointment. This is the case for breast cancer screening.
Control0..1
Typetime
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
14. BeModelPopulationScreening.invitation.locationName
Definition

For some screenings, but not all, a location is provided for the patient.

ShortHuman readable name of the location where the patient is invited to participate.
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
16. BeModelPopulationScreening.invitation.locationAddress
Definition

For some screenings, but not all, a location is provided for the patient.

ShortHuman readable address of the invitation location
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
18. BeModelPopulationScreening.participation
Definition

A participation is not mandatory. A patient can choose not to participate for a screening.

ShortThe participation details
Control0..1
TypeBackboneElement
20. BeModelPopulationScreening.participation.date
Definition

The date the patient participated in the population based screening

ShortThe date the patient participated in the population based screening
Control1..1
Typedate
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
22. BeModelPopulationScreening.participation.locationName
Definition

For some screenings, but not all, a location is provided for the patient.

ShortHuman readable name of the location where the patient participated
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
24. BeModelPopulationScreening.participation.locationAddress
Definition

For some screenings, but not all, a location is provided for the patient.

ShortHuman readable address of the participation location
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
26. BeModelPopulationScreening.participation.result
Definition

Notify the patient if the result was abnormal/positive or normal/negative

ShortThe result of participation in the population based screening
Control0..1
TypeCodeableConcept
28. BeModelPopulationScreening.participation.followup
Definition

This data acts purely as info for the patient to inform the patient of proposed actions and should not be followed up by the screening authority.

ShortDetails of proposed actions for the patient after the screening concluded.
Control0..1
TypeBackboneElement
30. BeModelPopulationScreening.participation.followup.needed
Definition

Indication if the patient should request or take other examinations/steps based on the outcome of the screening.

ShortIndication if the patient should request or take other examinations/steps based on the outcome of the screening.
Control0..1
Typeboolean
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
32. BeModelPopulationScreening.participation.followup.advice
Definition

Indication what other examinations/steps the patient should take.

ShortIndication what other examinations/steps the patient should take.
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
34. BeModelPopulationScreening.participation.followup.request
Definition

The other examinations that the patient should take.

ShortThe other examinations that the patient should take.
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
36. BeModelPopulationScreening.nextInvitation
Definition

This field gives a short human readable indication for the patient if the patient can expect future invitations for the population based screening and an estimation when the next invitation will be created. If the patient will not receive future invitations for the screening, a short explanation will be given.

ShortThis field gives a short human readable indication for the patient if the patient can expect future invitations for the population based screening and an estimation when the next invitation will be created. If the patient will not receive future invitations for the screening, a short explanation will be given.
Control1..1
TypeBackboneElement
38. BeModelPopulationScreening.nextInvitation.type
Definition

Type of the next invitation or lack of next invitation

ShortType of the next invitation or lack of next invitation
Control1..1
TypeCodeableConcept
40. BeModelPopulationScreening.nextInvitation.date
Definition

(Partial) date of next invitation, if applicable

Short(Partial) date of next invitation, if applicable
Control0..1
TypedateTime
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension

Guidance on how to interpret the contents of this table can be found here

0. BeModelPopulationScreening
Definition

Logical model for recurrent population based screening. The model represents one iteration of a screening, called episode. A patient can have multiple episodes for a given screening. A screening of a specific type for a given patient can be repeated after a certain period. Each time the screening is repeated results in a new episode.


Base definition for all elements in a resource.

ShortLogical model for population screening eventBase for all elements
Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Logical ModelInstances of this logical model are not marked to be the target of a Reference
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
2. BeModelPopulationScreening.patient
Definition

The patient for the screening

ShortThe patient for the screening
Control1..1
TypeReference(Patient)
4. BeModelPopulationScreening.screeningType
Definition

The related screening, for example breast cancer, colon cancer or cervicalcancer.

ShortThe related screening
Control1..1
TypeCodeableConcept
6. BeModelPopulationScreening.screeningYear
Definition

The year of the screening process/episode for the given screening. If the patient participated, the participation year is taken. If the patient didn't participate, the calendar year of the invitation is taken. If there is no invitation or participation, there will be no episode. For example, if patient is allowed a population based screening every 2 years for a given screening type and the first screening episode invitation took place in 2022, the next episode will be created for the next invitation in 2024. If the patient has a refusal or exclusion registered and does not have a participation/invitation, so the patient does not have any episodes, the calendar year of the registration of the refusal/exclusion is taken.

ShortThe calendar year of the screening
Control1..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
8. BeModelPopulationScreening.invitation
Definition

An invitation is not mandatory, in some cases a patient can participate for a screening without an invitation.

ShortThe appointment details of the invitation
Control0..1
TypeBackboneElement
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. BeModelPopulationScreening.invitation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. BeModelPopulationScreening.invitation.date
Definition

The date the patient is invited to participate in the population based screening

ShortThe date the patient is invited to participate in the population based screening
Control1..1
Typedate
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
14. BeModelPopulationScreening.invitation.time
Definition

The time for the screening if there is a proposed appointment. This is the case for breast cancer screening.

ShortThe time for the screening if there is a proposed appointment. This is the case for breast cancer screening.
Control0..1
Typetime
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
16. BeModelPopulationScreening.invitation.locationName
Definition

For some screenings, but not all, a location is provided for the patient.

ShortHuman readable name of the location where the patient is invited to participate.
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
18. BeModelPopulationScreening.invitation.locationAddress
Definition

For some screenings, but not all, a location is provided for the patient.

ShortHuman readable address of the invitation location
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
20. BeModelPopulationScreening.participation
Definition

A participation is not mandatory. A patient can choose not to participate for a screening.

ShortThe participation details
Control0..1
TypeBackboneElement
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. BeModelPopulationScreening.participation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. BeModelPopulationScreening.participation.date
Definition

The date the patient participated in the population based screening

ShortThe date the patient participated in the population based screening
Control1..1
Typedate
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
26. BeModelPopulationScreening.participation.locationName
Definition

For some screenings, but not all, a location is provided for the patient.

ShortHuman readable name of the location where the patient participated
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
28. BeModelPopulationScreening.participation.locationAddress
Definition

For some screenings, but not all, a location is provided for the patient.

ShortHuman readable address of the participation location
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
30. BeModelPopulationScreening.participation.result
Definition

Notify the patient if the result was abnormal/positive or normal/negative

ShortThe result of participation in the population based screening
Control0..1
TypeCodeableConcept
32. BeModelPopulationScreening.participation.followup
Definition

This data acts purely as info for the patient to inform the patient of proposed actions and should not be followed up by the screening authority.

ShortDetails of proposed actions for the patient after the screening concluded.
Control0..1
TypeBackboneElement
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. BeModelPopulationScreening.participation.followup.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
36. BeModelPopulationScreening.participation.followup.needed
Definition

Indication if the patient should request or take other examinations/steps based on the outcome of the screening.

ShortIndication if the patient should request or take other examinations/steps based on the outcome of the screening.
Control0..1
Typeboolean
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
38. BeModelPopulationScreening.participation.followup.advice
Definition

Indication what other examinations/steps the patient should take.

ShortIndication what other examinations/steps the patient should take.
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
40. BeModelPopulationScreening.participation.followup.request
Definition

The other examinations that the patient should take.

ShortThe other examinations that the patient should take.
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
42. BeModelPopulationScreening.nextInvitation
Definition

This field gives a short human readable indication for the patient if the patient can expect future invitations for the population based screening and an estimation when the next invitation will be created. If the patient will not receive future invitations for the screening, a short explanation will be given.

ShortThis field gives a short human readable indication for the patient if the patient can expect future invitations for the population based screening and an estimation when the next invitation will be created. If the patient will not receive future invitations for the screening, a short explanation will be given.
Control1..1
TypeBackboneElement
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. BeModelPopulationScreening.nextInvitation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. BeModelPopulationScreening.nextInvitation.type
Definition

Type of the next invitation or lack of next invitation

ShortType of the next invitation or lack of next invitation
Control1..1
TypeCodeableConcept
48. BeModelPopulationScreening.nextInvitation.date
Definition

(Partial) date of next invitation, if applicable

Short(Partial) date of next invitation, if applicable
Control0..1
TypedateTime
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension

Guidance on how to interpret the contents of this table can be found here

0. BeModelPopulationScreening
Definition

Logical model for recurrent population based screening. The model represents one iteration of a screening, called episode. A patient can have multiple episodes for a given screening. A screening of a specific type for a given patient can be repeated after a certain period. Each time the screening is repeated results in a new episode.

ShortLogical model for population screening event
Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Logical ModelInstances of this logical model are not marked to be the target of a Reference
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
2. BeModelPopulationScreening.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
4. BeModelPopulationScreening.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on BeModelPopulationScreening.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. BeModelPopulationScreening.patient
    Definition

    The patient for the screening

    ShortThe patient for the screening
    Control1..1
    TypeReference(Patient)
    8. BeModelPopulationScreening.screeningType
    Definition

    The related screening, for example breast cancer, colon cancer or cervicalcancer.

    ShortThe related screening
    Control1..1
    TypeCodeableConcept
    10. BeModelPopulationScreening.screeningYear
    Definition

    The year of the screening process/episode for the given screening. If the patient participated, the participation year is taken. If the patient didn't participate, the calendar year of the invitation is taken. If there is no invitation or participation, there will be no episode. For example, if patient is allowed a population based screening every 2 years for a given screening type and the first screening episode invitation took place in 2022, the next episode will be created for the next invitation in 2024. If the patient has a refusal or exclusion registered and does not have a participation/invitation, so the patient does not have any episodes, the calendar year of the registration of the refusal/exclusion is taken.

    ShortThe calendar year of the screening
    Control1..1
    Typestring
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    12. BeModelPopulationScreening.invitation
    Definition

    An invitation is not mandatory, in some cases a patient can participate for a screening without an invitation.

    ShortThe appointment details of the invitation
    Control0..1
    TypeBackboneElement
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. BeModelPopulationScreening.invitation.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    16. BeModelPopulationScreening.invitation.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on BeModelPopulationScreening.invitation.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 18. BeModelPopulationScreening.invitation.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      20. BeModelPopulationScreening.invitation.date
      Definition

      The date the patient is invited to participate in the population based screening

      ShortThe date the patient is invited to participate in the population based screening
      Control1..1
      Typedate
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      22. BeModelPopulationScreening.invitation.time
      Definition

      The time for the screening if there is a proposed appointment. This is the case for breast cancer screening.

      ShortThe time for the screening if there is a proposed appointment. This is the case for breast cancer screening.
      Control0..1
      Typetime
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      24. BeModelPopulationScreening.invitation.locationName
      Definition

      For some screenings, but not all, a location is provided for the patient.

      ShortHuman readable name of the location where the patient is invited to participate.
      Control0..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      26. BeModelPopulationScreening.invitation.locationAddress
      Definition

      For some screenings, but not all, a location is provided for the patient.

      ShortHuman readable address of the invitation location
      Control0..1
      Typestring
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      28. BeModelPopulationScreening.participation
      Definition

      A participation is not mandatory. A patient can choose not to participate for a screening.

      ShortThe participation details
      Control0..1
      TypeBackboneElement
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. BeModelPopulationScreening.participation.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      32. BeModelPopulationScreening.participation.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on BeModelPopulationScreening.participation.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 34. BeModelPopulationScreening.participation.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        36. BeModelPopulationScreening.participation.date
        Definition

        The date the patient participated in the population based screening

        ShortThe date the patient participated in the population based screening
        Control1..1
        Typedate
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        38. BeModelPopulationScreening.participation.locationName
        Definition

        For some screenings, but not all, a location is provided for the patient.

        ShortHuman readable name of the location where the patient participated
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        40. BeModelPopulationScreening.participation.locationAddress
        Definition

        For some screenings, but not all, a location is provided for the patient.

        ShortHuman readable address of the participation location
        Control0..1
        Typestring
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        42. BeModelPopulationScreening.participation.result
        Definition

        Notify the patient if the result was abnormal/positive or normal/negative

        ShortThe result of participation in the population based screening
        Control0..1
        TypeCodeableConcept
        44. BeModelPopulationScreening.participation.followup
        Definition

        This data acts purely as info for the patient to inform the patient of proposed actions and should not be followed up by the screening authority.

        ShortDetails of proposed actions for the patient after the screening concluded.
        Control0..1
        TypeBackboneElement
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. BeModelPopulationScreening.participation.followup.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        48. BeModelPopulationScreening.participation.followup.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on BeModelPopulationScreening.participation.followup.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 50. BeModelPopulationScreening.participation.followup.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          52. BeModelPopulationScreening.participation.followup.needed
          Definition

          Indication if the patient should request or take other examinations/steps based on the outcome of the screening.

          ShortIndication if the patient should request or take other examinations/steps based on the outcome of the screening.
          Control0..1
          Typeboolean
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          54. BeModelPopulationScreening.participation.followup.advice
          Definition

          Indication what other examinations/steps the patient should take.

          ShortIndication what other examinations/steps the patient should take.
          Control0..1
          Typestring
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          56. BeModelPopulationScreening.participation.followup.request
          Definition

          The other examinations that the patient should take.

          ShortThe other examinations that the patient should take.
          Control0..1
          Typestring
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          58. BeModelPopulationScreening.nextInvitation
          Definition

          This field gives a short human readable indication for the patient if the patient can expect future invitations for the population based screening and an estimation when the next invitation will be created. If the patient will not receive future invitations for the screening, a short explanation will be given.

          ShortThis field gives a short human readable indication for the patient if the patient can expect future invitations for the population based screening and an estimation when the next invitation will be created. If the patient will not receive future invitations for the screening, a short explanation will be given.
          Control1..1
          TypeBackboneElement
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          60. BeModelPopulationScreening.nextInvitation.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          62. BeModelPopulationScreening.nextInvitation.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on BeModelPopulationScreening.nextInvitation.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 64. BeModelPopulationScreening.nextInvitation.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            66. BeModelPopulationScreening.nextInvitation.type
            Definition

            Type of the next invitation or lack of next invitation

            ShortType of the next invitation or lack of next invitation
            Control1..1
            TypeCodeableConcept
            68. BeModelPopulationScreening.nextInvitation.date
            Definition

            (Partial) date of next invitation, if applicable

            Short(Partial) date of next invitation, if applicable
            Control0..1
            TypedateTime
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension